VIEW THE MSDS

204

ASPHALT EMULSION ROOF COATING 
Fibered

DESCRIPTION
ALCO Fibered Asphalt Emulsion Roof Coating consists of a specially formulated asphalt, an emulsifying agent, clay filler, with non-asbestos fibers for brush or spray application.

USE
· Inexpensive protective coating for BUR, metal or roll roofing

ADVANTAGES
· Easy application
· Ready to use from the container
· Capable of bonding on damp surfaces (not wet)
· No heating or thinning
· Fast and economical way to coat roof deck

PREPARATION
Roof surface and all parapets should be swept clean of all dust and dirt. All repairs should be done before coating, using a cotton or fiberglass membrane or ALCO Poly-S, along with ALCO Plastic Roof Cement, ALCO Wet-Bond Cement or ALCO 24/7 Flashing Cement.

APPLICATION
Stir material to even consistency and color. For best results, apply when the temperature is 50° F. and rising, with no rain forecasted within 24 hours. Allow 4 – 8 hours drying time under normal drying conditions For effective cure, allow 2 days.

BRUSH APPLICATION:  Apply with a soft bristle brush. Pour material directly from the container and brush to a smooth and even coat.

SPRAY APPLICATION:  Use a standard type mastic pump

APPROXIMATE COVERAGE
Brush Application                40 – 50 SF/Gallon
Spray Application                40 – 50 SF/Gallon

SPECIFICATION
ASTM D-1227, Type II, Class 1

PACKAGING
5   Gallon Pail        36/Pallet
55 Gallon Drum       4/Pallet

LIMITATIONS
· PROTECT FROM FREEZING
· For outdoor use only
· For professional use only
· Do not thin this material
· Do not use on wood 
· If winter storage is necessary, maintain temperature above 50° F. and keep material off floor
· Secure cover when not in use

PROPERTIES
Weight per Gallon (Approximate):  8.3 Lbs
Percent Non-Volatile (Fed Test Method 141):  50% +
Percent of Asphalt:  45% +
Percent of Total Solids, by Volume:  53% +
Viscosity:  10,000 – 15,000 cps
Ash on Basis of Non-Volatile Material:  5% Minimum
Penetration of Base Asphalt (ASTM D-5):  85 – 100
Flash Point of Base Asphalt, C.O.C. F:  450 + 
Ductility of Base Asphalt:  100 +
Film Thickness of 1 Gal/50 SF (Less Absorption by Surface):  1/32”

FOR FURTHER SAFETY INFORMATION SEE MSDS REGARDING THIS PRODUCT

PRECAUTIONS
Caution    
Contains Petroleum Hydrocarbons
Hazard Rating:  Health – 1    Fire – 0    Reactivity – 0
                            (0 = Least; 4 = Extreme)
Personal Protection:  Avoid prolonged or repeated contact with skin, which may cause irritation. Wear chemical resistant gloves. Do not get in eyes; wear protective goggles or face shield. Wear protective clothing if needed. Do not take internally.
Fire Protection:  Non-flammable
First Aid
Eye Contact – Rinse immediately with water for 15 minutes and seek medical advice.
Skin Contact – Wash with a waterless hand cleaner and/or soap and water.
Ingestion – Do not induce vomiting. Get medical attention immediately.
Waste Disposal – Seal container when not in use. Empty containers must be disposed in an approved landfill in accordance with local, state and Federal regulations.

KEEP OUT OF REACH OF CHILDREN!

WARRANTY
We warrant our materials to be of good quality and will replace materials found defective, providing, however, that the buyer shall examine the materials when received and promptly notify us of any defects before the materials are used or incorporated into a structure for which they are intended. Unless otherwise agreed to in writing, this warranty shall extend only to comply with specifications of materials manufactured by and published by Alco Products llc, and made available to the buyer at request. We cannot warrant nor in any way guarantee particular methods, use or applications, nor can we warrant that the materials will be suitable for any intended use. This warranty is in lieu of all others expressed or implied and may not be extended by representatives, written sales or information or drawings. Nor do our distributors or salesmen or any other representatives of distributors or of this  company have any authority to extend any guarantee beyond that outlined above or to waive the limitations of the seller's liability.