MATERIAL SAFETY DATA SHEET

 

ALCO PRODUCTS LLC                                                                 Dated:  September 22, 2009

580 ST JEAN                                                                 

DETROIT MI 48214-3476

313-823-7500

FAX:  313-3314726

 

PRODUCT:  #199     ALCO AIR GUARD      

 

SECTION 1     PRODUCT IDENTIFICATION

Trade Name:  Waterproofing Membrane 

Hazard Rating:  No known hazardous ingredients

 

SECTION 2     HAZARDOUS INGREDIENTS

Chemical Name:                    PERCENT                 OSHA-PEL                      ACGIH-TLV

   Petroleum Asphalt               27 – 38           None Established                   5 mg/m3

      CAS #8052-42-4                                                                  8 HR TWA (Asphalt Fumes)

      Carcinogen: OSHA – No     IARC – No     NTP – No

 

   Heavy Parafinic Distillate       2 – 15             None Established                     N/A

      (Solvent Extract)

      CAS #64742-52-5

 

   Styrene-Butadiene-Styrene    3 – 20             None Established                     N/A

      (Block Copolymer)

      CAS #9003-55-8

 

SECTION 3     PHYSICAL/CHEMICAL DATA

Form:  Solid

Volatiles: Not Applicable

Boiling Point:  Not Applicable

Flash Point: C.O.C. >430° F.

Specific Gravity: >1.0

Vapor Pressure:  Not Applicable

Appearance:  Fiberglass mat saturated with rubberized asphalt on a black plastic sheet with plastic
   release film.  

 

SECTION 4     FIRE & EXPLOSION DATA

Flash Point:  C.O.C. > 430° F. 

Flammable Limits in Air:  Lower – Not Applicable

                                    Upper – Not Applicable

Fire Fighting Procedures:  Wear self-contained breathing apparatus and complete personal, protective
   equipment when potential for exposure to vapors or products of combustion exist. Avoid breathing
   hazardous vapors or products of combustion; keep upwind. Isolate area and keep unnecessary people
   away. Prevent run-off from fire control or dilution from entering streams or drinking water supplies.

Extinguishing Media:  Use Dry Chemical, Foam, Carbon Dioxide or Water Spray 

Flammability:  No

NEPA Rating:  Health – 1       Flammability – 1       Reactivity - 0

 

SECTION 5     REACTIVITY DATA

This material is stable.

Materials to Avoid:  Not Applicable

Hazardous Polymerization:  Will not occur

Decomposition Product:  Oxides of Carbon and Nitrogen   

 

SECTION 6     HEALTH HAZARD DATA

Primary Routes of Entry:  Not Applicable

Effects of Overexposure (Chronic): None Known

Effects of Over Exposure (Acute):

   Skin – Prolonged contact may cause irritation and/or dermatitis. 

   Ingestion – Can cause gastrointestinal irritation.   

SECTION 7     FIRST AID PROCEDURE

Skin:  Wash with mild soap and water. If redness, etc., persists, consult a physician.

Ingestion:  Do not induce vomiting. Consult a physician immediately. 

 

SECTION 8     PREVENTATIVE MEASURES/SAFE HANDLING & USE

Leak and Spill Procedure:  Not applicable.

Waste Disposal:  Dispose in approved landfill in accordance with Federal, state and local regulations.

Precautions in Handling & Storage:  Avoid prolonged contact with skin. Practice good personal hygiene.
   Read label of product in its entirety before use.


KEEP OUT OF REACH OF CHILDREN!

 

SECTION 9     CONTROL PROTECTION DATA

Ventilation:  Not Applicable 

Gloves:  As needed for scuff resistance 

Eye Protection:  Not Applicable 

Personal Protection Equipment:  Requirements must be supplied by the user, depending
   on use conditions.

 

SECTION 10     REGULATORY INFORMATION

Reportable Quantities:  Not Applicable 

RCRA Hazardous Waste No.:  Not Applicable 

Proper Shipping Name:  Modified Asphalt Membrane – Roll Form

Hazard Class:  Not regulated under CFR 49, Section 173, 118A

Labels Required:  None

 

SECTION 11     SHIPPING INFORMATION

DOT Shipping Description:  Not Regulated 

ID #:  None

Labels Required:  None

Packaging Requirements (49 CFR)(Specific):  None

 

SECTION 12     USER RESPONSIBILITY

This product material safety data sheet provides health and safety information. The product is to be used in applications consistent with our product literature. Individuals handling this product must be informed of the recommended safety precautions and must have access to this information. For any other uses, exposures must be evaluated so that appropriate handling practices and training programs can be established to ensure safe work place operations. Please consult your local sales representative for any further information.

 

SECTION 13     CLEAN UP AND DISPOSAL

Practice good personal hygiene. Launder contaminated clothing before reuse. Use control protection such as chemical splash proof goggles, oil resistant gloves, barrier cream. Clean tools and equipment with kerosene, adhering to manufacturer’s precautions. DO NOT USE GASOLINE OR NAPHTHA. Follow proper container management in disposing of containers. CERCLA amendment on disposal of containers should be followed.

 

SECTION 14     DISCLAIMER

The information set forth herein is believed to be accurate but is not warranted to be, whether originating with ALCO PRODUCTS LLC or not. Recipients are advised to confirm in advance of need that the information is current, applicable and suitable to their circumstances.

 

This Material Safety Data Sheet supersedes all other previously dated sheets for this product.